What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
Mo’ dropper, mo’ better. On small frames, you can run 125 – 150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Build
If it’s our fault, we’ll fix it. Simple as that.
Specifications:
| Version | V2S |
| Model Version | Ripmo V2S |
| Frame Material | Carbon front and rear triangle |
| Frame Weight | 6.3 lbs / 2.86 kg w/ DPX2, 6.74 lbs / 3.09 kg w/ X2 |
| Complete Build Weight | Starting at 28.2 lbs |
| Wheel Size | 29” / up to 2.5″ tires |
| Front Travel | 160mm |
| Rear Travel | 147mm |
| Shock Specs | 210 x 55mm |
| Boost Axles | 148mm rear / 110mm front |
| Seatpost Diameter | 31.6mm |
| Rear Brake | 180mm Post mount / 203mm max rotor |
| Chainstay Length | 435mm |
| Bottom Bracket | Threaded (73mm BSA) |
| Chainline | 55mm chainline, 182mm Q Factor |
| Derailleur Hanger | SRAM UDH |
| ISCG 05 Compatible | ISCG 05 Tab Mount available separately |
| Headset | ZS44 upper / ZS56 lower |
| Colors | EnduroCell or Bruce Banner |
| Sizes | S / M / L / XL |
| Frame Warranty | Lifetime |
Build Kit:
| Fork | Fox Factory Series, Float 38, 160mm, 44mm offset, 29”, 110x15mm |
| Shock | Fox Float Factory Series, X2 with EVOL, 210 x 55 |
| Wheels | Blackbird Send Alloy (Send I front, Send II rear) / 29″ / Ibis Hubs |
| Tires | Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi |
| Brakes | Shimano SLX M7120, 4 piston |
| Brake Rotors | Shimano SM-RT66 203/180 |
| Cranks | Shimano SLX M7120 24mm spindle, 30t Alloy Ring S/M: 170mm, L/XL: 175mm |
| S/M: 170mm, L/XL: 175mm | |
| Bottom Bracket | Shimano SLX BB52 |
| Rear Derailleur | Shimano SLX M7100 Shadow Plus |
| Shift Levers | Shimano SLX M7100 |
| Cassette | Shimano SLX, 10-51T |
| Chain | Shimano SLX M7100 |
| Headset | Cane Creek 40 ZS44/ZS56 |
| Grips | Lizard Skin Charger Evo |
| Handlebar | Blackbird Aluminum, 780mm |
| Stem | Ibis 31.8mm S/M: 40mm, L/XL: 50mm |
| Seatpost | Bike Yoke Revive Dropper S: 125mm, M: 160mm, L: 185mm, XL: 213mm. Note there is a 250lb rider weight limit on this post. |
| Saddle | WTB Silverado |
Fast Shipping and Professional Packaging
Thanks to our longstanding association with UPS FedEx DHL, and other leading global carriers, we can provide various shipping options. Our warehouse staff will package all goods to our exacting specifications. Before shipping your items will be thoroughly inspected and secured. Every day we ship thousands of packages to customers from all over the world. Our dedication to becoming the biggest online retailer around the globe is evident by this. The warehouses and centers of distribution are situated in Europe and the USA.
Orders that include more than 1 item are assigned processing times according to each item.
We will carefully examine all items before sending. The majority of orders will be delivered within 48 hours. Expected delivery times are between 3 and 7 days.
Returns
The stock is constantly changing and not fully managed by us due to the involvement of many entities, including the factory as well as our warehouse. The levels of stock can change at any moment. Please be aware that it is possible for your order to become unavailable even after you have placed the order.
Our policy lasts for a period of 30 days. If thirty days have passed since you purchased your product, we are unable to provide a refund or exchange.
The item you purchase must be in the original packaging and not be used. The item must be returned in the original packaging.
Related products
Mountain Bike
2021 Specialized Stumpjumper Comp 29″ Carbon Mountain Bike – S3, WHITE MOUNTAINS/BLACK Specialized
Suspension Fork
Dropper Seatpost
2021 Fox Transfer 31.6 x 200mm Internal Ano Performance Elite Dropper Seatpost – Open Box, New FOX
Mountain Bike
2021 Specialized Stumpjumper Comp 29″ Carbon Mountain Bike – S1, WHITE MOUNTAINS/BLACK Specialized
Arm Protection
Mountain Bike
Uncategorized
