What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
Mo’ dropper, mo’ better. On small frames, you can run 125 – 150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Build
If it’s our fault, we’ll fix it. Simple as that.
Specifications:
| Version | V2S |
| Model Version | Ripmo V2S |
| Frame Material | Carbon front and rear triangle |
| Frame Weight | 6.3 lbs / 2.86 kg w/ DPX2, 6.74 lbs / 3.09 kg w/ X2 |
| Complete Build Weight | Starting at 28.2 lbs |
| Wheel Size | 29” / up to 2.5″ tires |
| Front Travel | 160mm |
| Rear Travel | 147mm |
| Shock Specs | 210 x 55mm |
| Boost Axles | 148mm rear / 110mm front |
| Seatpost Diameter | 31.6mm |
| Rear Brake | 180mm Post mount / 203mm max rotor |
| Chainstay Length | 435mm |
| Bottom Bracket | Threaded (73mm BSA) |
| Chainline | 55mm chainline, 182mm Q Factor |
| Derailleur Hanger | SRAM UDH |
| ISCG 05 Compatible | ISCG 05 Tab Mount available separately |
| Headset | ZS44 upper / ZS56 lower |
| Colors | EnduroCell or Bruce Banner |
| Sizes | S / M / L / XL |
| Frame Warranty | Lifetime |
Build Kit:
| Fork | Fox Factory Series, Float 38, 160mm, 44mm offset, 29”, 110x15mm |
| Shock | Fox Float Factory Series, X2 with EVOL, 210 x 55 |
| Wheels | Blackbird Send Alloy (Send I front, Send II rear) / 29″ / Ibis Hubs |
| Tires | Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi |
| Brakes | Shimano XT M8120, 4 piston |
| Brake Rotors | Shimano SM-RT86 200/180 |
| Cranks | Shimano XT M8120 24mm spindle, 30t Alloy Ring S/M: 170mm, L/XL: 175mm |
| Bottom Bracket | Shimano XT MT800 |
| Rear Derailleur | Shimano XT M8100 Shadow Plus 12 speed |
| Shift Levers | Shimano XT M8100 12 speed |
| Cassette | Shimano XT 10-51 |
| Chain | Shimano XT M8100 12 speed |
| Headset | Cane Creek 40 ZS44/ZS56 |
| Grips | Lizard Skin Charger Evo |
| Handlebar | Blackbird Carbon Hi Fi, 31.8mm, 800mm |
| Stem | Industry Nine A318 S/M: 40mm, L/XL: 50mm |
| Seatpost | Bike Yoke Revive Dropper S: 125mm, M: 160mm, L: 185mm, XL: 213mm. Note there is a 250lb rider weight limit on this post. |
| Saddle | WTB Silverado |
Prompt shipping and expert packing
Our long-standing partnership with UPS FedEx DHL and other carriers around the world lets us offer a range of shipping services. Our warehouse staff is highly skilled and will pack your products according to our precise and exact specifications. Before shipping, all goods are thoroughly inspected and secured. We deliver to thousands of customers every day in a variety of countries. The fact that we're determined to become the largest online retailer in the World is clear. There are distribution centers and warehouses across Europe as well as the USA.
Orders that include more than 1 item are assigned processing periods in accordance with the item.
We will inspect each and every one of the items before sending. Most orders are delivered within 48 hours. The delivery time is between 3-7 working days.
Returns
The stock is dynamic and we do not completely manage it due to the fact that multiple parties are involved, which includes our warehouse and factory. Stock levels can fluctuate at any moment. You may not receive your purchase after it has been placed.
Our policy is valid for a period of 30 days. We are unable to exchange or refund your order when it's been 30 days from the date of purchase.
You are able to return a product in the event that it is not used and is in the same condition as when you received it. The item should be in the original packaging.
Related products
Mountain Bike
Uncategorized
Uncategorized
Suspension Fork
Uncategorized
Uncategorized
Suspension Fork
