What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy
The Ripmo V2S is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig.
Mo’ dropper, mo’ better. On small frames, you can run 125 – 150mm, pending your preference and inseam length. Our shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were we. That’s why we use bushings where they make sense, and bearings where they don’t. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We believe so strongly in them, we back them with a free lifetime replacement.
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
Bikes that look pretty on the outside, should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Our removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Build Kit
Build
If it’s our fault, we’ll fix it. Simple as that.
Specifications:
| Version | V2S |
| Model Version | Ripmo V2S |
| Frame Material | Carbon front and rear triangle |
| Frame Weight | 6.3 lbs / 2.86 kg w/ DPX2, 6.74 lbs / 3.09 kg w/ X2 |
| Complete Build Weight | Starting at 28.2 lbs |
| Wheel Size | 29” / up to 2.5″ tires |
| Front Travel | 160mm |
| Rear Travel | 147mm |
| Shock Specs | 210 x 55mm |
| Boost Axles | 148mm rear / 110mm front |
| Seatpost Diameter | 31.6mm |
| Rear Brake | 180mm Post mount / 203mm max rotor |
| Chainstay Length | 435mm |
| Bottom Bracket | Threaded (73mm BSA) |
| Chainline | 55mm chainline, 182mm Q Factor |
| Derailleur Hanger | SRAM UDH |
| ISCG 05 Compatible | ISCG 05 Tab Mount available separately |
| Headset | ZS44 upper / ZS56 lower |
| Colors | EnduroCell or Bruce Banner |
| Sizes | S / M / L / XL |
| Frame Warranty | Lifetime |
Build Kit:
| Fork | Fox Factory Series, Float 38, 160mm, 44mm offset, 29”, 110x15mm |
| Shock | Fox Float Factory Series, X2 with EVOL, 210 x 55 |
| Wheels | Blackbird Send Alloy (Send I front, Send II rear) / 29″ / Ibis Hubs |
| Tires | Maxxis Assegai 29” x 2.5” WT, EXO+ casing, 120tpi |
| Brakes | SRAM Code RSC, 4 piston |
| Brake Rotors | SRAM Centerline 6 bolt 203mm/180mm |
| Cranks | SRAM X01 Eagle DUB Wide spindle, 30t Alloy Ring S/M: 170mm, L/XL: 175mm |
| Bottom Bracket | SRAM DUB BSA |
| Rear Derailleur | SRAM X01 Eagle |
| Shift Levers | SRAM X01 Eagle |
| Cassette | SRAM XG 1295 Eagle 10-52 |
| Chain | SRAM X01 Eagle |
| Headset | Cane Creek 40 ZS44/ZS56 |
| Grips | Lizard Skin Charger Evo |
| Handlebar | Ibis 800mm Hi Fi Bar |
| Stem | Industry Nine A318 S/M: 40mm, L/XL: 50mm |
| Seatpost | Bike Yoke Revive Dropper S: 125mm, M: 160mm, L: 185mm, XL: 213mm. Note there is a 250lb rider weight limit on this post. |
| Saddle | WTB Silverado |
Fast Shipping and Professional Packing
Because of our long-standing partnership in a long-standing partnership with UPS, FedEx, DHL and a variety of other top global carriers we can offer an array of shipping options. Our warehouse staff is highly trained and will be able to pack the items according to the exact and precise specifications. Your items will undergo an extensive inspection and will be adequately secured before being shipped. We deliver to hundreds of thousands of customers daily across different countries. This shows our commitment to becoming the largest online retailer in the world. These warehouses are in Europe just as they are in USA.
Note: Orders containing more than one item will be assigned a separate processing period for each item.
Prior to shipment Our team will conduct an extensive inspection of the products you ordered. The majority of orders will be delivered within 48 hours. The delivery time is between 3 and 7 working days.
Returns
Due to multiple entities such as the factory and the warehouse, we're unable to effectively manage inventory. The stock can change at any time. It is possible that you will not receive your order after it has been placed.
Our policy is for 30 days. If it's been more 30 days since you made your purchase, we unfortunately can't give you a complete refund or exchange.
Your item should be in its original packaging and be unused. It should also be returned in its original packaging.
Related products
Mountain Frame
2021 Santa Cruz Juliana Roubion 3 Carbon CC 27.5″ Frame Only – X-Small, Grey Santa Cruz
Mountain Bike
2021 Santa Cruz Bronson Carbon C 29 MX Complete Bike – Gold, Medium, R Build Santa Cruz
Suspension Fork
Uncategorized
Cycling Pants
Dropper Seatpost
Uncategorized
Mountain Bike
2021 Santa Cruz 5010 Carbon CC 27.5 Complete Bike – Raspberry, Large, X01 Build Santa Cruz
Suspension Fork
Uncategorized
Mountain Frame
2021 Santa Cruz Juliana Furtado 4 Carbon CC 27.5″ Frame Only – Medium, Redwood Santa Cruz
Suspension Fork
Leg Protection
Dropper Seatpost
2021 Fox Transfer 31.6 x 200mm Internal Ano Performance Elite Dropper Seatpost – Open Box, New FOX
Dropper Seatpost
Suspension Fork
Uncategorized
